Schneider Electric 4000 manual 132

Appendix A—Abbreviated Register Listing	63230-300-212
Register Listing	April 2001

Table A–3:Abbreviated Register List

Register	Description	Scale	Units	Register Range
Number		Factor
1144	Reactive Power, Phase A	F	kVAr/Scale	-32,767 to 32,767
1145	Reactive Power, Phase B	F	kVAr/Scale	-32,767 to 32,767
1146	Reactive Power, Phase C	F	kVAr/Scale	-32,767 to 32,767
1147	Reactive Power, Total	F	kVAr/Scale	-32,767 to 32,767
1148	Apparent Power, Phase A	F	kVA/Scale	-32,767 to 32,767
1149	Apparent Power, Phase B	F	kVA /Scale	-32,767 to 32,767
1150	Apparent Power, Phase C	F	kVA /Scale	-32,767 to 32,767 ￿
1151	Apparent Power, Total	F	kVA /Scale	-32,767 to 32,767
1160	True Power Factor, Phase A	—	0.001	-100 to 1,000 to 100
1161	True Power Factor, Phase B	—	0.001	-100 to 1,000 to 100
1162	True Power Factor, Phase C	—	0.001	-100 to 1,000 to 100		￿
1163	True Power Factor, Total	—	0.001	-100 to 1,000 to 100
1164	Alternate True Power Factor, Phase A	—	0.001	0 to 2,000
1165	Alternate True Power Factor, Phase B	—	0.001	0 to 2,000
1166	Alternate True Power Factor, Phase C	—	0.001	0 to 2,000	￿
1167	Alternate True Power Factor, Total	—	0.001	0 to 2,000
1168	Displacement Power Factor, Phase A	—	0.001	-100 to 1,000 to 100
1169	Displacement Power Factor, Phase B	—	0.001	-100 to 1,000 to 100
1170	Displacement Power Factor, Phase C	—	0.001	-100 to 1,000 to 100		￿
1171	Displacement Power Factor, Total	—	0.001	-100 to 1,000 to 100 ￿
1172	Alternate Displacement Power Factor, Phase A	—	0.001	0 to 2,000
1173	Alternate Displacement Power Factor, Phase B	—	0.001	0 to 2,000
1174	Alternate Displacement Power Factor, Phase C	—	0.001	0 to 2,000	￿
1175	Alternate Displacement Power Factor, Total	—	0.001	0 to 2,000 ￿
1180	Frequency	—	0.01 Hertz	(50/60) 2,300 to 6,700
			0.1 Hertz	(400) 3,500 to 4,500
1181	Temperature	—	0.1 °C	-1,000 to 1,000
1190	Auxiliary Analog Input Value, User-Selected Input 1	—	Refer to Analog Input	-32,767 to 32,767
			Setup
1191	Auxiliary Analog Input Value, User-Selected Input 2	—	Refer to Analog Input	-32,767 to 32,767
			Setup
1192	Auxiliary Analog Input Value, User-Selected Input 3	—	Refer to Analog Input	-32,767 to 32,767
			Setup

See “How Power Factor is Stored in the Register” on page 128.

The alternate storage method for power factor (PF) is useful for outputting PF on analog outputs. The PF value is stored as a positive value between 0 and 2, centered around 1 (unity). A value of 0 lagging maps to 0; -0.999 maps to 0.999;0.999 leading maps to 1.001; and 0 leading maps to 2. The alternate PF is also stored with a scale factor 0.001.

These configuration registers require that you enter the setup mode to change the register’s contents. Issue command 9020 to enter setup mode and 9021 to exit setup mode. See “Using the Command Interface to Change Configuration Registers” on page 187 for instructions on

￿how to use the setup-mode commands.

Quantity available for 4-wire system only. Value set to -32,768 if not available.

132 © 2001 Schneider Electric All Rights Reserved