Schneider Electric 4000 Configuring the Circuit Monitor Using the Setup Menu, Operation April

63230-300-212	Chapter 3—Operation
April 2001	Configuring the Circuit Monitor Using the Setup Menu

CONFIGURING THE CIRCUIT MONITOR USING THE SETUP MENU

Setting Up the Display

Before you can access the Setup menu from the Main Menu, you must enter the Setup password. The default password is 0. To change the password, see “Setting Up Passwords” on page 27. The Setup menu has the following options:

•Date & Time

•Display

•Communications

•Meter

•Alarm

•I/O

•Passwords

Each of these options is described in the sections that follow.

Setting up the display involves, for example, choosing a date and time format that you want to be displayed. To set up the display, follow these steps:

1.From the Main Menu, select Setup > Display.

The Display Setup menu displays. Table 3–1describes the options on this menu.

DISPLAY

Language English

Date MM/DD/YYYY

Time Format AM/PM

VFD Sensitivity 2

Display Timer 5

Custom Quantity

Custom Screen

2.Use the arrow buttons to scroll to the menu option you want to change.

3.Press the enter button to select the value.The value begins to blink. Use the arrow buttons to scroll through the available values. Then, press the enter button to select the new value.

4.Use the arrow buttons to scroll through the other options on the menu, or if you are finished, press the menu button to save.

© 2001 Schneider Electric All Rights Reserved 13