Schneider Electric 4000 manual 133

63230-300-212	Appendix A—Abbreviated Register Listing
April 2001	Register Listing

Table A–3:Abbreviated Register List

Register	Description	Scale	Units	Register Range
Number		Factor
1193	Auxiliary Analog Input Value, User-Selected Input 4	—	Refer to Analog Input	-32,767 to 32,767
			Setup
1194	Auxiliary Analog Input Value, User-Selected Input 5	—	Refer to Analog Input	-32,767 to 32,767
			Setup
1195	Auxiliary Analog Input Value, User-Selected Input 6	—	Refer to Analog Input	-32,767 to 32,767
			Setup
1196	Auxiliary Analog Input Value, User-Selected Input 7	—	Refer to Analog Input	-32,767 to 32,767
			Setup
1197	Auxiliary Analog Input Value, User-Selected Input 8	—	Refer to Analog Input	-32,767 to 32,767
			Setup
1198	Auxiliary Analog Input Value, User-Selected Input 9	—	Refer to Analog Input	-32,767 to 32,767
			Setup
1199	Auxiliary Analog Input Value, User-Selected Input 10	—	Refer to Analog Input	-32,767 to 32,767
			Setup
Power Quality
1200	THD/thd Current, Phase A	—	0.10%	0 to 32,767
1201	THD/thd Current, Phase B	—	0.10%	0 to 32,767
1202	THD/thd Current, Phase C	—	0.10%	0 to 32,767
1203	THD/thd Current, Neutral	—	0.10%	0 to 32,767
1204	THD/thd Current, Ground	—	0.10%	0 to 32,767
1207	THD/thd Voltage, Phase A-N	—	0.10%	0 to 32,767
1208	THD/thd Voltage, Phase B-N	—	0.10%	0 to 32,767
1209	THD/thd Voltage, Phase C-N	—	0.10%	0 to 32,767
1210	THD/thd Voltage, Phase N-G	—	0.10%	0 to 32,767 ￿
1211	THD/thd Voltage, Phase A-B	—	0.10%	0 to 32,767
1212	THD/thd Voltage, Phase B-C	—	0.10%	0 to 32,767
1213	THD/thd Voltage, Phase C-A	—	0.10%	0 to 32,767
1218	K-Factor, Current, Phase A	—	0.10	0 to 10,000
1219	K-Factor, Current, Phase B	—	0.10	0 to 10,000
1220	K-Factor, Current, Phase C	—	0.10	0 to 10,000
1221	Crest Factor, Current, Phase A	—	0.01	0 to 10,000
1222	Crest Factor, Current, Phase B	—	0.01	0 to 10,000
1223	Crest Factor, Current, Phase C	—	0.01	0 to 10,000
1224	Crest Factor, Current, Neutral	—	0.01	0 to 10,000
1225	Crest Factor, Voltage, A-N/A-B	—	0.01	0 to 10,000
1226	Crest Factor, Voltage, B-N/B-C	—	0.01	0 to 10,000
1227	Crest Factor, Voltage, C-N/C-A	—	0.01	0 to 10,000
1230	Current Fundamental RMS Magnitude, Phase A	A	Amps/Scale	0 to 32,767

See “How Power Factor is Stored in the Register” on page 128.

The alternate storage method for power factor (PF) is useful for outputting PF on analog outputs. The PF value is stored as a positive value between 0 and 2, centered around 1 (unity). A value of 0 lagging maps to 0; -0.999 maps to 0.999;0.999 leading maps to 1.001; and 0 leading maps to 2. The alternate PF is also stored with a scale factor 0.001.

These configuration registers require that you enter the setup mode to change the register’s contents. Issue command 9020 to enter setup mode and 9021 to exit setup mode. See “Using the Command Interface to Change Configuration Registers” on page 187 for instructions on

￿how to use the setup-mode commands.

Quantity available for 4-wire system only. Value set to -32,768 if not available.

© 2001 Schneider Electric All Rights Reserved 133