Brother PR-620 operation manual Easily changing the thread spools

OTHER BASIC PROCEDURES —————————————————————————————————————————————

Easily changing the thread spools

When replacing the thread spools, it is necessary to re-thread the upper thread. However, the thread spools can easily be changed when replacing a thread spool whose thread is correctly threaded through the machine.

1Cut the thread between the thread spool and the thread guide.

2Change the thread spool.

3Tie the end of the thread on the new spool with the end of the thread remaining from the previous color.

4Pull out the old thread just after the needle bar thread guide.

Continue pulling the thread until the knot is above the needle. Cut the knot.

5Use the automatic needle-threading mechanism to thread the needle with the new thread. (Refer to page 39)

X This completes the changing of the thread spool.

Note

●When pulling out the thread, do not pull the knot through the eye of the needle. If the knot is pulled through the eye of the needle, the needle may be damaged.

78