Brother PR-620 operation manual 178, Check for the following conditions

APPENDIX —————————————————————————————————————————————————————

6Close the clamping frame, and then hook the catch of the snap lock to temporarily secure it.

1Catch of the snap lock

2 Clamping frame

Check for the following conditions.

1The centerline of the cap is parallel with the short side of the clamping frame.

2The line on the left side of the cap cannot

be seen within the clamping frame.

3The teeth on the inside of the clamping

frame cleanly grab the base of the brim.

4The centerline of the brim holder and the center line of the cap must make a single straight line.

4

3

1

2

1Teeth on the inside of the clamping frame

2 Centerline of brim holder

Memo

●According to the shape of the cap, loosen the screw 4 and adjust the position of the clamping frame 3 so that the teeth on the inside of the clamping frame 1 align with the base of cap brim 2.

Memo

●If the cap fabric is thick and the clamping frame cannot be closed, or if the fabric is thin and the cap is too loose within the frame, adjust the clamping frame.

178