Brother PR-620 operation manual Change thread spools message

Changing the Thread Spools with Designs of Seven or More Colors

This section contains details on understanding the change thread spools message and on easily changing the thread spools.

Change thread spools message

When it is necessary to replace the thread spool while embroidering a pattern that contains seven or more colors, the machine automatically stops sewing and the message shown below appears. This message also appears when it is necessary to change the thread spools before beginning to embroider a new pattern. Change the thread spools according to their new assignments.

1The needle bars where the thread spools must be changed appear in color.

2The needle bars where it is not necessary to change the thread spools appear in gray.

3Touch this key to close the message indicating that the thread spool be changed.

Note

●When the embroidering screen is displayed, the current thread color assignment is stored. If the same thread color is used the next time that the thread spools must be changed, the needle bar will be assigned the same thread color as before.

Memo

●To use a different thread color than the one that was specified, use temporary needle bar setting key, and then change the thread color setting. (For details, refer to “Temporary Needle Bar Setting” on

page 94.)

●To minimize changing the thread spools, frequently used thread colors can be specifically assigned to certain needle bars.

(For details, refer to “Reserved Needle Bar	3
Settings” on page 96.)

Changing the Thread Spools with Designs of Seven or More Colors 77