Brother PR-620 operation manual Additional digitizing information, 186

APPENDIX —————————————————————————————————————————————————————

6Align the holes on the embroidery frame holder with the pins in the frame-mounting plate of the carriage.

1Pins in the frame-mounting plate

2Holes on the embroidery frame holder

7Secure the embroidery frame holder with the two thumb screws.

1Use the thumb screws included with the machine (thumb screws removed in step 1 on page 171).

CAUTION

●Using the disc-shaped screwdriver included, firmly tighten the thumb screws.

Additional digitizing information

When creating a pattern for embroidering with a cap frame, pay attention to following points in order to avoid registration problems (misalignment of gaps in the pattern).

1Sew underlay stitches.

2Start the embroidery pattern from the center, and sew toward the ends.

With the machine, the order in which patterns are selected when they are combined is the order in which they will be sewn. For the following example, select the patterns in the order “E”→”A”→”B”→”R” to make the combined pattern “BEAR”.

Incorrect sewing order

Correct sewing order

Note

●Do NOT sew from one end to the other, otherwise wrinkling or shrinking may occur.

186