Brother PR-620 operation manual 4If necessary, touch the arrow keys to adjust, 5embroidering area

The size of the pattern is displayed after a key is touched to change it.

1Repeat spacing (vertical)

2 Repeat spacing (horizontal)

• To quit repeating the pattern and return it to

its original arrangement, touch so

that it changes to .

4If necessary, touch the arrow keys to adjust

the position of the embroidery frame. For more details, refer to page 72.

If necessary, touch	to check the
5embroidering area.

For more details, refer to page 32.

6After specifying the desired repeat settings,

touch .

X The embroidering settings screen appears again.

Memo

●If is touched to return to the pattern editing screen after specifying repeat settings, the pattern appears as it did before the repeat settings were specified, but the settings are not cancelled. When the embroidering settings screen is displayed again, the pattern appears with the repeat settings applied. However, if an error occurs, for example, if the pattern is enlarged in the pattern editing screen so that it extends out of the embroidering area when it is repeated, the following error message appears.

1Touch to return to the pattern editing screen so that the pattern can be re-edited.

Changing the colors of the pattern

The colors of the pattern can be changed and previewed in the screen. The function and operation for this key is the same as that for the change thread color key in the pattern editing screen.

1Touch .

XThe change thread color screen appears.

5

2Forpagedetails127. on changing the colors, refer to

Memo

●Even if is touched to return to the pattern editing screen after colors are changed, the settings are not cancelled.

Editing the Embroidery Pattern (Embroidering Settings Screen) 131