Brother PR-620 operation manual 172, This completes the installation of the cap frame driver

APPENDIX —————————————————————————————————————————————————————

3Pass the machine bed through the ring of the cap frame driver.

1

1Machine bed

Note

●Be careful that the cap frame driver does not hit any nearby parts, such as the presser foot.

Attach the cap frame driver to the carriage as described below in steps 4 through 6.

4Insert the two thumb screws at the bottom of the cap frame driver into the v-cuts in the carriage, and then place the mounting plate of the cap frame driver on top of the frame- mounting plate of the carriage.

3

4

2 1

1Notch in the carriage

2Thumb screw of the cap frame driver

3 Mounting plate of the cap frame driver

4 Frame-mounting plate of the carriage

5Insert the pins on the frame-mounting plate of the carriage into the holes in the mounting plate of the cap frame driver.

1

2

1Pins on the frame-mounting plate of the carriage

2 Holes in the mounting plate of the cap frame driver

6Insert and tighten the two upper thumb screws in outer holes of mounting plate of cap frame driver.

7While pushing in the cap frame driver toward the machine so that it is fully inserted, tighten the two lower thumb screws to secure the cap frame driver.

XThis completes the installation of the cap frame driver.

172