Brother PR-620 operation manual 3Placing a sheet of stabilizer

2Release the snap lock on the standard cap frame down and then disengage the latch. Open the clamping frame. Also, open brim presser.

3

2

1

1Snap lock released

2Clamping frame opened

3 Brim presser

3Placing a sheet of stabilizer.

Placing a sheet of about 100 mm (4 inches) x 250 mm (10 inches) of stabilizer on top of the lower frame, place a cap in the frame.

1100 mm (4 inches)

2 250 mm (10 inches)

3 Stabilizer

4Lift up (flip) the sweat guard on the inside of the cap, and then place the cap in the standard cap frame.

Using both hands, hold both sides of the cap, and then align the edge of the lower frame with the base of the brim.

1Edge of the lower frame

2 Sweat guard

3 Base of the brim

At the same time, align the centerline of the cap with the centerline of the sweat guard holder on the standard cap frame, and then slide the sweat guard under the sweat guard holder.

1Sweat guard holder

2Centerline of sweat guard holder

3 Centerline of cap

5After arranging the brim, firmly push in the cap as far as possible.

7

Using the Optional Cap Frame 177