Brother PR-620 Sewing the Embroidery, Following screen appears, Continuing embroidering

XThe following screen appears.

1A red frame around the thread information box indicates which needle bar is currently being used for sewing.

•While the embroidery machine is sewing, the point being sewn is indicated by the green crosshairs in the pattern display area. In addition, the number of stitches and the time count up.

3After sewing of the first color is finished, the machine automatically stops and trims the thread. The needle bar case moves to the 2nd color position and sewing of the second color begins.

XThe thread color display in the screen continues to the second color, and the thread information for the second needle bar is surrounded by the red frame.

4This continues until the last color is sewn, and the embroidery machine automatically stops.

X The embroidering settings screen reappears.

X The start/stop button lights up in red.

•No thread trimming operations at the beginning of stitching and at the end of stitching are necessary.

■Continuing embroidering

To sew the same pattern again, touch .

XThe embroidering screen appears so the same pattern can be sewn again.

To select a new pattern, touch or .

XThe pattern type selection screen appears.

Note

●Automatic Lock stitching can be set so that it is sewn at the beginning of the embroidery, when starting to sew after change thread colors, and when trimming the thread. (Refer to “Automatic Lock Stitch Setting” on page 88.)

●The sewing speed can be changed, even while the pattern is being sewn. (Refer to “Maximum Sewing Speed Setting” on page 91.)

2

1

2

3

4

5

6

7

8

9

10

11

12

13

14

Sewing the Embroidery 43