A-2 Sun Ultra 20 Workstation Getting Started Guide • April 2006
A.1 Creating a 32-bit Windows XP (Service Pack 2) RIS Image
This section tells you how to create a Windows XP 32-bit image on a RIS server and
then add platform specific drivers to the image. All drivers for this procedure are
located on the Supplemental CD, version 1.3 or later.
Note – Before using this procedure, you must install the RIS onto a Windows 2003
server. See the following URL for complete instructions on how to install the RIS.
http://support.microsoft.com/default.aspx?scid=kb;en-us;325862

A.1.1 Creating the Windows XP SP2 32-bit Image on the

RIS Server

To copy Windows XP SP2 32-bit onto the RIS server, do the following steps. Click
Next or Finished in each screen to advance to the next screen.
1. Insert the Windows XP SP2 32-bit CD into the RIS server's CDROM drive.
2. In the Start menu, select Run.
3. To start the RIS setup program, type the following command:
Note – In all commands, c:\ is shown as the DOS command prompt.
4. In the “Welcome to the Remote Installation Services Setup Wizard“ screen, click
Next.
5. In the “Remote Installation Services Options“ screen, choose “Add a new OS
image to this remote installation server“.
6. In the Installation Source Files Location screen, choose the CDROM drive with
the Windows XP SP2 32-bit CD.
c:\ risetup.exe