Sun Microsystems 20

2-2 Sun Ultra 20 Workstation Getting Started Guide • April 2006

FIGURE 2-1 Installation Flow Diagram

Install the operating system.

READY TO WORK!

See Section 1.5, “Powering On the Worksta-

tion” on page 1-8.

See Section 3.1, “Configuring Solaris 10 Op-

erating System Software” on page 3-1.

See Section 2.2, “Installing the Operating System” on

page 2-5.

Configure the

preinstalled

operating

system.

Use a

preinstalled

operating

system?

If installing Red Hat Linux,

run the up2date utility.

Is this a

Windows XP

or Solaris 10

installation?

Set up the

BIOS for a

Linux OS

installation.

See Section 2.1.2, “Setting up the BIOS for

Operating System Installation” on page 2-4.

See Section 2.3, “Running the up2date Utility” on page 2-6

Install the drivers from the Supplemental CD. See Section 2.4, “Installing Drivers and Mounting the Diag-

nostic Partition” on page 2-6.

Is there

space on the

hard disk for

installation?

Use the

Supplemental

CD to erase

the primary

boot disk.

See Section 2.1.1, “Erasing the Primary Boot

Hard Disk” on page 2-3.

Yes

Power on the workstation.

START