Appendix A Creating Windows Images on a RIS Server and Installing RIS Images A-7
A.2 Creating a 64-bit Windows XP RIS Image
This section tells you how to create a Windows XP 64-bit image on a RIS server and
then add platform specific drivers to the image. All drivers for this procedure
located on the Supplemental CD, version 1.3 or later.
Note – Before using this procedure, you must install RIS onto a Windows 2003
server. See the following URL for complete instructions on how to install the RIS.
http://support.microsoft.com/default.aspx?scid=kb;en-us;325862

A.2.1 Installing Windows XP 64-bit onto the RIS Server

To copy the Windows XP 64-bit CD onto the RIS server, do the following steps. Click
Next or Finished in each screen to advance to the next screen.
1. Insert the Windows XP 64-bit CD into the RIS server's CDROM drive.
2. In the Start menu, select Run.
3. To start the RIS setup program, type the following command:
Note – In all commands, c:\ is shown as the DOS command prompt.
4. In the “Welcome to the Remote Installation Services Setup Wizard“ screen, click
Next.
5. In the “Remote Installation Services Options“ screen, choose “Add a new OS
image to this remote installation server“.
6. In the “Installation Source Files Location” screen, choose the CDROM drive with
the Windows XP 64-bit CD.
7. In the “Windows Installation Image Folder Name“ screen, type a descriptive name
for the Windows XP 64-bit CD image you are creating. For example:
c:\ risetup.exe
Ultra_20_Windows_XP_64-bit