Brother PR-620 If the upper thread breaks, Repage-thread35.the upper thread. Refer to Touch

If the Thread Breaks or the Bobbin Thread Runs Out While Embroidering

If the thread breaks or the bobbin thread runs out while embroidering, the machine will automatically stop. Since some stitches may be sewn with only one thread, go back through the stitching to a point where stitches have already been sewn before continuing embroidering.

Note

●Be careful when going back or forward through the stitching since the embroidery frame moves at the same time.

If the upper thread breaks

1Repage-thread35.)the upper thread. (Refer to

2Touch .

XThe stitch navigating screen appears.

3Touch and to go back through the stitching to a point where stitches have

already been sewn.

1Each touch of this key moves one stitch back through the stitching.

2Each touch of this key moves ten stitches back through the stitching.

The embroidery frame moves. Go back to the point where stitches have already been sewn.

If the needle bar is moved back too far		3
through the stitching, touch	or
to go forward through the stitching.

1Each touch of this key moves one stitch forward through the stitching.

2Each touch of this key moves ten stitches forward through the stitching.

4Touch .

XThe embroidering screen appears again.

5Touch , and then press the start/stop button to continue embroidering.

If the Thread Breaks or the Bobbin Thread Runs Out While Embroidering 79