Brother PR-620 operation manual Winding the bobbin, 190, 2Set the thread spool on the spool pin

APPENDIX —————————————————————————————————————————————————————

Winding the bobbin

Prepare the bobbin and the spool of bobbin thread. Use cotton or spun polyester bobbin thread (from 74 dtex/2 to 100 dtex/2).

1Align the groove in the bobbin with the spring on the bobbin winder shaft, and set the bobbin on the shaft.

2

1

1Groove in the bobbin

2 Spring on the shaft

2Set the thread spool on the spool pin.

Note

●When using a small spool, remove the spool cushion and set the spool directly onto the spool pin. Also use the included spool cap to keep the small spool stable.

3Pass the thread through the hole in the left of the thread guide toward the front of the winder.

1

1Hole in the thread guide

4Pass the thread around the tension disk as shown in the illustration. Make sure that the thread is correctly fed into the tension disk.

1

1 Tension disk

2

1Thread spool

2 Spool pin

190