Brother PR-620 operation manual Installing the Bobbin, Removing the bobbin case

EMBROIDERING TUTORIAL ——————————————————————————————————————————————

1. Installing the Bobbin

When the machine is purchased, only the bobbin case is installed in the hook. Insert a bobbin wound with bobbin thread for embroidering. For precautions concerning the bobbin, refer to page 15.

Note

●The machine cannot indicate how much bobbin thread is remaining. Before starting to embroider make sure that there is enough bobbin thread for the pattern.

●Make sure to clean the bobbin case every time the bobbin is changed. For details on cleaning the bobbin case, refer to “Cleaning the bobbin case” on page 195.

Removing the bobbin case

1Open the hook cover.

Pull the hook cover toward you.

2Pull the thread picker toward you.

1

1Thread Picker

To gain access to the bobbin case easily, pull the thread picker toward front.

Note

●Thread picker is a device that is used to hold the thread when begining to sew or when trimming the thread.

CAUTION

●The thread picker can only be moved within a certain range. Do not pull it with extreme force.

3Grab the bobbin case latch, and remove the bobbin case.

1

1Latch

■Oiling the machine

After removing the bobbin case, apply oil to the machine. The race should be oiled. For details on oiling the machine, refer to “Oiling the machine” on page 196.

Note

●Put a drop of oil onto the hook once a day before use.

18