Brother PR-620 operation manual Setting up the optional bobbin winder, Connecting the AC adapter

Setting up the optional bobbin winder

Attach the spool pin, spool cushion and thread guide to the bobbin winder.

1Insert the spool pin and the spool cushion. Lower the holder, and then insert the spool pin straight into the hole. And insert the spool cushion.

4

1

2

3

1Spool pin

2Spool pin holder

3 Hole for spool pin

4 Spool cushion

2Insert the thread guide.

Insert the thread guide straight into the hole with the pins on the thread guide aligned with the notches on the sides of the hole.

1

2

3

1Pins on thread guide

2Notches on hole for thread guide

3 Hole for thread guide

•Firmly insert the thread guide as far as possible and make sure that it is secure.

Connecting the AC adapter

1Insert the plug of the power supply cord into the AC adapter.

2Plug the cord on the AC adapter into the DC input connector of the bobbin winder, and then insert the plug of the power supply cord into a household electrical outlet.

•Be sure to firmly insert the plug on the AC adapter into the DC input connector of the bobbin winder.

CAUTION

●Be sure to use the included AC adapter. Using any other AC adapter may result in damage.

●Before connecting or disconnecting the AC adapter, be sure that the unit is not operating.

●After using the bobbin winder, disconnect it from the electrical outlet.

7

Using the Optional Bobbin Winder 189