Brother PR-620 Saving Embroidery Patterns, 4To delete the data, press, Recalling stored patterns

•If the wrong pattern was selected or you wish to select a different pattern, touch the desired pattern.

3Touch .

XThe screen shown below appears.

4To delete the data, press .

XThe pattern is deleted, and if there is enough space, the previous screen appears automatically.

• To quit deleting, press .

5Ifpattern.there is not enough space, delete another

X If the embroidery data was saved successfully, the previous screen automatically appears.

•Saving the data takes approximately 10 seconds.

Note

•Do not turn off the machine while the "Saving" message is displayed, otherwise the pattern data being saved may be lost.

■Recalling stored patterns

Refer to the appropriate page of "Selecting an Embroidery Pattern" according to the media being used. (For patterns saved on the machine, refer to page 111. For patterns saved on USB media, refer to page 117.

USB Media

(Commercially Available)

When sending embroidery patterns from the machine to USB media, plug the USB media into the machine’s USB Type “A” (host) port. Depending on the type of USB media being used, either directly plug the USB device into the machine’s USB Type “A” (host) port or plug the USB Card Reader/Writer into the machine’s USB port.

Memo

●Some USB media may not be usable with this machine. Please visit our web site for more details.

1Press when the pattern you want to save is in the sewing screen.

5

2Insert the USB media into the USB port connector on the machine.

a

b

1USB Type “A” (host) port connector for media

2 USB media

Saving Embroidery Patterns 137