Electrolux E36GC70ISS, E30GC70ISS, E36IC80ISS Induction Cooktop, Electrolux Major Appliances, N.A

Models: E30GC70ISS E36GC70ISS E30IC80ISS E36IC80ISS

1 4
Download 4 pages 63.01 Kb
Page 2
Image 2
Induction Cooktop

Induction Cooktop

E30IC80ISS

13"

max.

cabinet

depth

11/2" min. recommended distance between rear edge of cutout and nearest combustible surface above countertop

30 3/4"

 

30 3/4"

 

211/2"

1/4"

 

 

 

4 3/8" to

 

 

28 7/8"

service

19 7/8"

 

panel

 

 

 

Approximate location

10"

4 1/2"

 

of junction box

 

 

 

 

12"

 

3"

18"

min.

30" min. for

unprotected cabinet

24" min. for

protected surface

7 1/2" min. to nearest combustible wall (either side of unit)

20 3/8" min. 25" min. 20 1/2" max.

24"

2 1/2" min. from edge of cutout to front edge of countertop

 

 

29 5/8" min.

 

 

 

29 3/4" max.

 

 

 

Side View

 

4" x 8" opening

Countertop

Countertop

 

Cooktop

 

to route armored cable

 

 

 

Front

3"

4 3/8"

Rear

1/4"

 

 

7"

11"

Service panel

 

 

 

30" Induction Cooktop Specifications

Product Weight – 44 Lbs.

Single phase 3- or 4-wire cable, 120/240 or 120/208 Volt, 60 Hertz, fused on both sides of line with ground.

Connected Load (kW Rating) @ 240/208 Volts = 7.7/6.7kW

Amps @ 240/208 Volts = 32.0/32.0 Amps

Recommended Circuit Breaker – 40 Amps

Always consult local and national electric codes.

Allow 2"space below armored cable opening to clear electrical cable and allow space for installation of junction box on wall at back of cooktop.

Overhead cabinetry should not exceed a 13" maximum depth.

Allow 30" minimum clearance between top of cooktop and bottom of unprotected wood or metal overhead cabinetry.

Absolute minimum horizontal distance between overhead cabinets installed to either side of appliance must be no less than maximum width of appliance.

Allow 24" minimum clearance when bottom of wood or metal overhead cabinet is protected by not less than 1/8" flame-retardant millboard covered with not less than No. 28 MGS sheet steel, 0.015" stainless steel, 0.024" aluminum or 0.020" copper.

Allow 1-1/2" minimum clearance between rear edge of cutout and nearest combustible surface above countertop.

Allow 7-1/2" minimum clearance from edge of cooktop to nearest combustible wall on either side of unit.

It is recommended that drawers not be used beneath cooktop.

To reduce risk of fire when using overhead cabinetry, install vent hood that projects horizontally a recommended minimum of 5" beyond bottom of cabinets.

Induction Drop-In Cooktop model E30IC80ISS is approved to be used over any Electrolux ICON® Single Wall Oven. (Refer to Electric Cooktop Installation Over 30" Electric Single Wall Oven Specifications page on web.)

Induction Drop-In Cooktop model E30IC80ISS is approved to be used in combination with an Electrolux ICON® 30" Downdraft Vent. (Refer to Drop-In Cooktop / Downdraft Vent Countertop Preparation page on web for detailed installation specifications.)

Note: For planning purposes only. Refer to Product Installation Guide on the web at electroluxicon.com for detailed instructions.

Optional Accessories

Granite Countertop Installation Kit – (PN# 903061-9010).

Electrolux Major Appliances, N.A.

USA 250 Bobby Jones Expressway Augusta, GA 30907 1-877-4electrolux (1-877-435-3287) electroluxicon.com

High standards of quality at Electrolux Home Products, Inc. mean we are

CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4 1-800-265-8352 electroluxicon.ca

constantly working to improve our products. We reserve the right to change

specifications or discontinue models without notice.

E30IC80ISS 10/09

© 2009 Electrolux Home Products, Inc.

Printed in the U.S.A.

Page 2
Image 2
Electrolux E36GC70ISS, E30GC70ISS, E36IC80ISS, E30IC80ISS specifications Induction Cooktop, Electrolux Major Appliances, N.A