When attaching the main unit to a wall

Make sure that the screw used and the wall are strong enough to support the weight of at least 33 kg (73 lbs). The screws and other items are not supplied as the type and size will vary with each installation. ≥Refer to step 3 for details about the required screws.

≥Be sure to attach the fall prevention cord as a secondary safety measure.

Additionally required accessories (commercially available)

≥Screws for wall mounting	k 2
≥Fall prevention cord	k 1
≥Screw eye (to attach the fall prevention cord)	k 1

≥Use a cord that is capable of supporting over 10 kg (22 lbs) (with a diameter of about 2 mm (3/32q)).

Slide the MULTI ANGLE switch to “WALL MOUNT”.

Attach the cord to the main unit.

Precautions



ACord§

§If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 5 mm (3/16q) apart from the tip, at an angle of 45o (as illustrated above).

Getting started

VQT5J41 13

Page 13

Image 13

Panasonic SC-HTB8 When attaching the main unit to a wall, Slide the MULTI ANGLE switch to “WALL MOUNT”, Precautions

Contents

VQT5J41 Included Installation InstructionsModel No. SC-HTB8 Button-type battery Lithium battery AC power supply cordDO NOT INGEST BATTERY CHEMICAL BURN HAZARD Unit The following mark and symbols are located on bottom of the unit PlacementPrecautions FCC Note IMPORTANT SAFETY INSTRUCTIONS Limited WarrantyStep 2 Placement Using this system ∏ 1 Remote control with a battery N2QAYC000102 AccessoryPrecautions Before use Getting started Operations Reference Supplied items Control reference guide 1 Standby/on switch Í/IThis system Front This system Rear Before using for the first time Remote controlTo replace a button-type battery ∫ About remote control signal sensor D AC power supply cord AC power supply cord connectionStep 1 Connections Connection with the TV A Bluetooth pairing Press to select “ ” Bluetooth connectionPress and hold until the “ ” indicator flashes quickly Select “SC-HTB8” from the Bluetooth menu of your device Safety Precautions Step 2 PlacementWireless interference Professional installation is required When placing the main unit on a rack or on a table Selecting the placement methodWhen attaching the main unit to a wall When placing the main unit in front of the TV Additionally required accessories commercially available When placing the main unit on a rack or on a tableSlide the MULTI ANGLE switch to “RACK/TABLE TOP” Attach the cord to the main unit Slide the MULTI ANGLE switch to “WALL MOUNT” When attaching the main unit to a wall Fit the main unit securely onto the screws Drive a screw into the wallSecure the cord to the wall Front view semi-transparent image To adjust the volume of this system Using this system∫ When “ ” is selected as the source When “BD/DVD” is selected as the source Bluetooth Stand-by Auto Power DownOthers Remote control code To turn off the volume limitation Bluetooth TroubleshootingPairing cannot be done To return to the factory defaults There is no audio The power of the main unit turns off automatically The volume is lowered when the main unit is turned onSound No sound Clean this system with a soft, dry cloth About BluetoothUnit care License Indicator Indicator illuminationDescription The indicator blinks for 20 sec The indicator blinks for 20 sec Bluetooth SECTION SpecificationsTotal RMS Stereo mode power FTC output power Stereo mode Front ch both ch driven Limited Warranty Coverage For USA Only Panasonic Products Limited WarrantyLimited Warranty Limits And Exclusions Online Repair Request VQT5J41 VQT5J41 F0314KE0 If you see this symbolInformation on Disposal in other Countries outside the European Union Panasonic Corporation of North America

Panasonic SC-HTB8 When attaching the main unit to a wall, Attach the cord to the main unit

Models: SC-HTB8

When attaching the main unit to a wall

Slide the MULTI ANGLE switch to “WALL MOUNT”.