When placing the main unit on a rack or on a table
Additionally required accessories (commercially available)
≥Fall prevention cord | k 1 |
≥Screw eye (to attach the fall prevention cord) | k 1 |
|
|
≥Use commercially available screws that are capable of supporting over 33 kg (73 lbs).
≥Use a cord that is capable of supporting over 10 kg (22 lbs) (with a diameter of about 2 mm (3/32q)).
Slide the MULTI ANGLE switch to “RACK/TABLE TOP”.
≥Press the AC power supply cord into the holder.
Attach the cord to the main unit.
ACord§
§If the cord cannot be threaded through the holes, try bending the cord in 2 locations, about 5 mm (3/16q) apart from the tip, at an angle of 45o (as illustrated above).
Place the main unit in the desired position and attach the cord onto the rack or table.
≥Make sure that the slack of the cord is minimal.
≥Do not lean the main unit against the TV or wall.
≥Do not place the main unit over the AC power supply cord.
≥Ensure that the main unit is stable.
BScrew eye
≥Attach at a position capable of supporting over 10 kg (22 lbs).
≥Depending on the placement of the main unit, the screwing position of the screw eye may differ.
12 VQT5J41
