Panasonic SC-HTB8 Bluetooth connection, Preparation, Bluetooth pairing Press to select “ ”

Bluetooth® connection

By using the Bluetooth® connection, you can listen to the sound from your Bluetooth® audio device to this system wirelessly.

≥Refer to the operating instructions of the Bluetooth® device for further instruction on how to connect a Bluetooth® device.

Preparation

≥Turn on the Bluetooth® feature of your device and place your device near the main unit.

Bluetooth® pairing

Press [ ] to select “ ”.

≥If the “ ” indicator flashes quickly, go to step 3.

Press and hold [ ] until the “ ” indicator flashes quickly.

≥If the “ ” indicator flashes slowly, repeat step 2.

Select “SC-HTB8” from the Bluetooth® menu of your device.

≥If prompted for the passkey on the Bluetooth® device, enter “0000”.

≥Once the Bluetooth® device is connected, the “ ” indicator stops flashing and lights up.

≥You can register 8 or more Bluetooth® devices to this unit.

However, when this unit is turned off, it can store only up to 8 registered devices. If you register 9 or more devices, devices with the oldest connection history will be deleted.

Connecting a paired Bluetooth® device

Press [ ] to select “ ”.

≥If the “ ” indicator lights, a Bluetooth® device is already connected with this system. Disconnect it. (> below)

Select “SC-HTB8” from the Bluetooth® menu of your device.

∫Disconnecting a Bluetooth® device

Press and hold [ ] until the “ ” indicator flashes slowly.

≥When “ ” is selected as the source, this system will automatically try and connect to the last connected Bluetooth® device. If the connection attempt fails, try to establish a connection again.

≥The Bluetooth® device will be disconnected if a different audio source (e.g. “TV”) is selected.

≥This system can only be connected to one device at a time.

Getting started

VQT5J41 9