Denon DVD-1000 Main Specifications, English, Signal system, Applicable discs, S-Video output

ENGLISH

17 MAIN SPECIFICATIONS

Signal system:	NTSC/PAL
Applicable discs:	(1) DVD/video discs
	1-layer 12 cm single-sided discs, 2-layer 12 cm single-sided discs, 2-layer 12 cm double-sided discs
	(1 layer per side)
	1-layer 8 cm single-sided discs, 2-layer 8 cm single-sided discs, 2-layer 8 cm double-sided discs
	(1 layer per side)
	(2) Compact discs (CD-DA, Video CD)
	12 cm discs, 8 cm discs
S-Video output:	Y output level: 1 Vp-p (75 Ω /ohms)	C output level: 0.286 Vp-p
	Output connectors: S connectors, 1 set
Video output:	Output level: 1 Vp-p (75 Ω /ohms) Output connector: Pin-plug jacks, 1 set
Component output:	Y output level: 1 Vp-p (75 Ω /ohms)
	CB output level: 0.648 Vp-p (75 Ω /ohms)	CR output level: 0.648 Vp-p (75 Ω /ohms)
	Output connector: Pin jack, 1 set
Audio output:	Fixed output level: 2 Vrms, 1 set
Audio output properties:	(1) Frequency response

qDVDs (linear PCM) : 2 Hz to 22 kHz (48 kHz sampling)

:2 Hz to 44 kHz (96 kHz sampling)

		w CDs	: 2 Hz to 20 kHz
	(2)	S/N ratio
		q DVDs	: 115 dB
		w CDs	: 115 dB
	(3)	Total harmonic distortion
		q DVDs	: 0.002 %
		w CDs	: 0.002 %
	(4)	Dynamic range
		q DVDs	: 106 dB
		w CDs	: 100 dB
Digital audio output:	Optical digital output		: Optical connector, 1 set
	Coaxial digital output		: Pin jack, 1 set
Power supply:	AC 120 V, 60 Hz
Power consumption:	14 W
Maximum external	434 (width) x 102 (height) x 266 (depth) mm (not including protruding parts)
dimensions:
Mass:	4.0 kg
2 Remote control unit:	RC-543
Type:	Infrared pulse
Power supply:	DC 3 V, 2 “AA” (R6P) batteries

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

✽Design and specifications are subject to change without notice in the course of product improvement.

45