JVC MX-KB30 manual Using the Cassette Deck Listening to a Tape, Playing a Tape, To Fast-WindA Tape

Page 19
Using the Cassette Deck (Listening to a Tape)

Using the Cassette Deck (Listening to a Tape)

7

4

¢

 

0 EJECT

TAPE

(Deck A)

3

 

TAPE A/B

 

¡

7

TAPE A/B

TAPE 3

0 EJECT

(Deck B)

22

Deck indicators

3: Tape indicator

*When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

The Cassette Deck allows you to play, record, and dub audio tapes.

Listening to type I tape is suitable for this Cassette Deck.

The use of tapes longer than 120 minutes is not rec- ommended, since characteristic deterioration may occur and these tapes easily jam in the pinch-rollers and the capstans.

One Touch Play

By pressing the TAPE 3 button, the System will come on, and if a tape is in the deck, it will start to play. If no tape is loaded, “NO TAPE” appears on the display, the System will come on and wait for you to insert a tape, or select another function.

Playing a Tape

You can use either Deck A or Deck B at a time for playback.

1 Press the 0 EJECT part for the deck you want to use.

2 When the cassette holder opens, put a cas- sette in, with the exposed part of the tape down, toward the base of the Unit.

The tape will travel from the left to right.

Tape travelling direction

If the cassette holder does not open, turn the System off, then back on and press the 0 EJECT part again.

3Close the cassette holder gently.

When both Deck A and Deck B contain a tape, the last deck to have a tape inserted is selected.

The selected Deck is shown by the Deck indicator “A” or “B”. For example, when the Deck A is selected, the Deck indicator “A” lights up.

To change the deck, press the TAPE A/B button. Each time you press the button, Deck A or Deck B is alternately selected.

4Press the TAPE 3button.

The Tape indicator (3) blinks on the display and the tape is played back.

The Cassette Deck automatically stops when one side of the tape has finished playing.

To stop playing, press the 7 button.

To remove the tape, stop the tape, and press the 0EJECT part to open the Cassette Holder.

To Fast-Wind A Tape

During playback or in Stop mode, press the ¡(FF) button on the Unit to fast-wind the tape onto the right side of the cassette without playing.(You can also use the ¢button on the Remote Control.) During playback or in Stop mode, press the 22(REW) button on the Unit to fast-wind the tape onto the left side of the cassette with- out playing.(You can also use the 4button on the Remote Con- trol.)

During fast-winding the tape, the Tape indicator (3) goes out. During fast-winding, the status bar illumination at the bottom of the display moves counterclockwise.

During rewinding, it moves clockwise.

The Cassette Deck automatically stops when one side of the tape has finished playing.

During fast-winding the tape, you can change the tape travelling direction by pressing the ¡ (FF) or 22 (REW) button.

16

Image 19
Contents Consists of CA-MXKB30and SP-MXKB30 MX-KB30COMPACT COMPONENT SYSTEM INSTRUCTIONSANCE TO RAIN OR MOISTURE Note to CATV system installerWARNING TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI15cm Caution - POWER switch16in 5/16inIntroduction Features1Installation of the System 2Power cordSpecifications Table of ContentsGetting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlFM wire antenna supplied Connecting the FM AntennaUsing the Supplied Wire Antenna Using an FM 75-OhmAntenna Cable not SuppliedRear Panel of the Unit Connecting the AM AntennaConnecting the Speakers Getting StartedDEMO Mode Connecting External EquipmentConnecting to the Wall Outlet On the Remote ControlTurning the System On Turning the Power On and OffAdjusting the Volume Basic OperationsSelecting the Sound Mode SOUND MODE Fade-outMuting FADE MUTINGReinforcing the Bass Sound ACTIVE BASS EX Emphasizing the sound SOUND TURBO1Press the FM/AM button Using the TunerTuning In a Station One Touch RadioMONO Presetting StationsUsing the Unit To Change the FM Reception ModeAbout the Disc Indicator Using the CD PlayerDisc Number indicator Lights all the time One Touch Play To Load CDsTo Unload CDs Example of indicationTo Select a Track Basics of Using the CD Player- Normal PlayUsing the CD Player To Play CDsTo Exit and Re-enterProgram Play Programming the Playing Order of the TracksTo Make a Program To Play the Program You Have MadeLocking the Tray Random PlayRepeating Tracks Tray Lock Function3Close the cassette holder gently Using the Cassette Deck Listening to a TapePlaying a Tape To Fast-WindA TapeThings To Know Before You Start Recording Using the Cassette Deck RecordingTo Record Any Sound Source to Tape Standard RecordingTape to Tape Recording DUB- BING CD Synchro Recording2Press the AUX button Using an External Equipment1 Set the volume level to the minimum posi- tion Listening to the External Equipment2Press the 4or ¢button to set the hour Using the TimersSetting the Clock 1Press the CLOCK/TIMER button3Setting the ON time Example AM Setting the Daily TimerUsing the Timers 4Setting the OFF time Example PM 12Press the CANCEL button on the Unit Setting the REC Recording TimerTurning the Daily Timer On and Off 6Setting the volume levelUsing the Timers Turning the REC Recording Timer On and Off5Select the preset station for recording the display2Set the length of time you want the source to Setting the SLEEP TimerTimer Priority 1During playback a source, press the SLEEP buttonCassette Deck Care And MaintenanceCompact Discs Cassette TapesAction TroubleshootingSymptom Possible CauseAuthorized Service Centers Do not service the television yourselfAccessories TOLL FREEWHAT IS NOT COVERED 1 YRLIMITED WARRANTY WHAT YOU MUST DO FOR WARRANTY SERVICEPower Specifications SpecificationsSpeaker Specifications each unit AccessoriesCOMPACT COMPONENT SYSTEM Se compose de CA-MXKB30et de SP-MXKB30VOLUME MX-KB30Attention - Commutateur POWER For Canada/pour le CanadaNote to CATV system installer Caution - POWER switchIMPORTANT POUR LES PRODUITS LASER IMPORTANT FOR LASER PRODUCTS2Power cord EnglishFeatures 1Installation of the SystemUsing the Timers Using the CD PlayerUsing the Cassette Deck Recording Using an External EquipmentGetting Started AccessoriesHow To Put Batteries In the Remote Control Using the Remote ControlFM wire antenna supplied Extend the supplied FM Connecting the FM AntennaUsing the Supplied Wire Antenna Using an FM 75-OhmAntenna Cable not SuppliedGetting Started Connecting the AM AntennaConnecting the Speakers EnglishDEMO Mode Connecting External EquipmentConnecting to the Wall Outlet On the Remote ControlEnglish Turning the Power On and OffAdjusting the Volume Basic OperationsEmphasizing the sound SOUND TURBO On the Remote ControlFade-outMuting FADE MUTING Reinforcing the Bass Sound ACTIVE BASS EXAuto Tuning Using the Unit only Using the TunerTuning In a Station Manual Tuning Using the Unit onlyEven if the System is unplugged or if the power Using the TunerPresetting Stations Using the UnitEnglish Using the CD PlayerAbout the Disc Indicator Disc Number indicator Lights all the timeEnglish To Load CDsTo Unload CDs Example of indicationDuring playback using the 4or ¢button Basics of Using the CD PlayerNormal Play Using the CD PlayerProgramming the Playing Order of the Tracks On the Remote ControlUsing the Unit Using the Remote ControlRandom Play 2While pressing down the 7button, press theUsing the CD Player On the Remote ControlOne Touch Play Using the Cassette Deck Listening to a TapePlaying a Tape EnglishTAPE A/B TAPE Using the Cassette Deck RecordingEnglish Things To Know Before You Start RecordingTo Record Any Sound Source to Tape Standard RecordingCD Synchro Recording Tape to Tape Recording DUB- BINGEnglish Using an External Equipment1 Set the volume level to the minimum posi- tion Listening to the External Equipment1Press the CLOCK/TIMER button Using the TimersSetting the Clock Using the Unit4Setting the OFF time Example PM Setting the Daily TimerUsing the Timers Using the Unit2Press the CANCEL button on the Unit Setting the REC Recording TimerTurning the Daily Timer On and Off 6Setting the volume level5Select the preset station for recording Using the TimersTurning the REC Recording Timer On and Off 2Press the CANCEL button on the UnitTo Cancel the SLEEP Timer Setting Setting the SLEEP TimerTimer Priority Using the Remote ControlCassette Tapes Care And MaintenanceEnglish Compact DiscsAccessories SpecificationTroubleshooting Symptom1203HMMCREBET EN, FR 2003 VICTOR COMPANY OF JAPAN, LIMITED