Using the camera buttons to set the camera
The recording mode function can be set up by using the camera buttons.
POWER button
Used for turning the camera’s power on / off. If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 63 for more information about the auto power off function.
SHUTTER button
Used for taking an image or recording voice in the Recording mode.
In MOVIE CLIP mode
Pressing the shutter button down fully starts the process for recording
a movie clip. Press the shutter button once and the movie clip is recorded
for as long as the available recording time in the memory allows. If you wish
to stop recording, press the shutter button again.
In Still image mode
Pressing the shutter button down halfway activates the autofo- cus and checks the condition of the flash. Pressing the shutter button down fully takes and stores the image. If you select voice memo recording, the recording will start after the camera has finished storing the image data.
Smart button
You can use the Smart button at the top of your camera to select the correct smart mode.
ÄSee p.55 for further details.
29
