JVC MX-J100 manual Using Recording Timer, When selecting FM or AM, Press CLOCK/TIMER

Page 23

Continued

English

7 When selecting “FM” or “AM.”

Press 4 or ¢ to select the
preset station number, then press
PROGRAM/SET.
The unit enters recording timer
setting mode.
If you want to continue the Recording
Timer setting, go to step 3 of the
Recording Timer setting procedure.	PROGRAM/SET

3 Press PROGRAM/SET.

“ON TIME” appears for 2 seconds, then	PROGRAM/SET
	PROGRAM/SET
the unit enters on-time setting mode.

8 Press CLOCK/TIMER.

CLOCK/TIMER

Theindicator stops flashing and remains lit.

If you have set the Daily Timer with the unit turned on, turn off the unit.

Using Recording Timer

With Recording Timer, you can make a tape of a radio broadcast automatically.

How Recording Timer actually works

The unit automatically turns on, tunes into the specified station, sets the volume level to the preset level and starts recording when the on-time comes. Then, when the off-time comes, the unit automatically turns off (stands by).

The timer setting remains in memory until you change it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting the timer, press CLOCK/TIMER once and start from step 1 again.

4 Set the on-time you want the unit to turn on.

1)Press 4 or ¢to set the hour, then press PROGRAM/

SET.
2) Press 4 or ¢to set the
minute, then press
PROGRAM/SET.
“OFF TIME” appears for 2 seconds,
then the unit enters off-time setting
mode.	PROGRAM/SET

5 Set the off-time you want the unit to turn off (on standby).

1)Press 4 or ¢to set the hour, then press PROGRAM/ SET.

2)Press 4 or ¢to set the minute, then press PROGRAM/ SET.

The unit enters the volume setting

mode.

PROGRAM/SET

On the unit ONLY:

1 Put a recordable cassette into deck B.

2 Press CLOCK/TIMER until “	CLOCK/TIMER
REC” appears on the display.

The indicator also starts flashing on the display.

•Each time you press the button, the timer setting modes change as follows:

Clock time CLOCK

REC TIMER

6 Set the volume level when the unit is turned on.

Press 4or ¢ to set the volume, then press PROGRAM/ SET.

The unit enters source selecting mode.	PROGRAM/SET

– 18 –

Image 23

Contents MX-J100 Precaución -- Interruptor Precaución CA-MXJ100 Class Laser Product About This Manual PrecautionsIntroduction Contents Become familiar with the buttons and controls on your unit Location of the Buttons and ControlsDisplay Window Front PanelRemote Control Remote ControlTo connect an outdoor FM antenna Unpacking Connecting AntennasGetting Started FM antennaFor better reception of both FM and AM Connecting SpeakersRelease the finger from the clamp AM antennaTo connect audio equipment Connecting Other EquipmentAdjusting the Voltage Selector Press Demo while the unit is turned off on stand byCommon Operations Setting the ClockTurning On the Power and Selecting the Sources Selecting the Sound Modes Setting the AM Tuner Interval SpacingAdjusting the Volume Reinforcing the Bass SoundListening to FM and AM Broadcasts Tuning in a StationTuning in a Preset Station Presetting StationsPlaying Back CDs Playing Back CDsLoading CDs Program Play Basic CD OperationsPlaying Back a Tape Playing Back TapesDubbing Tapes Resetting the Tape CounterRecording Recording Tapes on Deck BSinging Along Using the MicrophoneUsing Daily Timer Using the TimersHow Recording Timer actually works Using Recording TimerWhen selecting FM or AM Press CLOCK/TIMERPress Timer ON/OFF on the remote Using Sleep TimerSelect the preset station On the remote control only Press SleepTo protect your recording MaintenanceHandling discs Handling cassette tapesSymptom TroubleshootingSpecifications 0500KSMMDWSAM