JVC MX-GT700 Playing Back Tapes, Playing Back a Tape, Press Eject 0 for the deck you want to use

Playing Back Tapes

Playing Back a Tape

1 Press EJECT (0) for the deck you want to use.

To stop during play, press 7.

To operate the other deck, press TAPE A or TAPE B (or TAPE A/B on the remote control), then TAPE 3.

To fast-forward the tape, press ¡ (or ¢/¡ on the remote control). The tape running indicator (3) starts flashing quickly.

To rewind the tape, press 1 (or 4/1 on the remote control). The tape running indicator (2) starts flashing quickly.

To remove the cassette, press 0EJECT for deck A or

EJECT 0for deck B.

For Deck B

For Deck A

2 Put a cassette in, with the exposed part of the tape down and the side you want to play facing front.

• You can play back only type I tapes.

3 Close the cassette holder gently.

If you put cassettes in both decks A and B, the last deck which you have put a cassette into is selected.

To operate the other deck, press TAPE A or TAPE B (or TAPE A/B on the remote control).

4 Press TAPE 3.

The tape play starts and the tape running

TAPE

indicator (3) starts flashing slowly.

When the tape plays to the end, the deck automatically stops.

The use of the C-120 or thinner tape is not recommended, since characteristic deterioration may occur and this tape easily jams in the pinch- rollers and the capstans.

– 16 –