JVC MX-GT700 manual Playing Back CDs

	.
Playing Back CDs	Continued

This unit has been designed to playback the following CDs: Audio CD, CD-R, and CD-RW.

When playing a CD-R or CD-RW

User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-ReWritable) can be played back when they are already

“finalized.”

•You can play back your original CD-Rs or CD-RWs recorded in music CD format ONLY. (If CD-RWs have been recorded in different format, erase all the data on CD- RWs completely before re-recording on the discs.)

DO NOT play back CD-Rs or CD-RWs recorded the sound files such as MP3.

•Before playing back CD-Rs or CD-RWs, read their instructions or cautions carefully.

•Some CD-Rs or CD-RWs may not be played back on this unit because of their disc characteristics, damage or stain on them, or if the player’s lens is dirty.

Important notices:

•In general, you will have the best performance by keeping your CDs and the mechanism clean.

-Store CDs in their cases, and keep them in cabinets or on shelves.

-Keep the unit’s carrousel closed when not in use.

•Continuous use of irregular shaped discs (heart-shape, octagonal, etc.) can damage the disc rotating mechanism.

•CD-RWs may require a longer readout time since the reflectance of CD-RWs is lower than for regular CDs.

Loading CDs

1 Press 0.

The unit automatically turns on and the carrousel comes out.

2 Place one or two discs correctly on the front recesses of the disc tray, with its label side up.

CORRECT INCORRECT

•When using a CD single (8 cm), place it on the inner recess of the disc tray.

3 If you wish to load a third disc, press	DISC CHANGE
DISC CHANGE on the unit or DISC
SKIP on the remote control.
The disc tray rotates by 120˚.	DISC
	SKIP

4 Press 0 again.

The carrousel closes.

About the disc indicators

Each disc indicator corresponds to the disc tray of the same number.

Disc number

Disc indicator

Disc marker

•The disc marker lights up for the disc number you have selected.

•The disc indicator rotates while the corresponding CD is being played.

•The disc indicator goes off when the unit has detected that there is no CD on the corresponding disc tray.

Playing Back CDs—All Disc and One Disc

You can play all loaded CDs continuously—All Disc play, or one selected disc—One Disc play.

All Disc play

1 Load CDs.

•If the current playing source is not the CD player, press CD 6, then 7before going to the next step.

2 Press REPEAT repeatedly so that the REPEAT PRO

ALL DISC indicator lights up on the display.

Track number of the currently playing disc flashes (Track numbers exceeding 16 are not displayed.)

Track number Elapsed playing time

•Each time you press the button, the indication on the display changes as follows:

ALL DISC 1 DISC REPEAT 1*

(initial setting)

English

REPEAT ALL DISC* REPEAT 1 DISC*

*See page 15.

– 12 –