Smooth Fitness UB4 user manual Install Computer, Install Seat, Install Pedals and Pedal Straps

Page 10

10

UB4 Upright Bike

ASSEMBLY - INSTRUCTIONS

Step 5 - Install Computer

Connect the Upper Computer Wire (47) and Hand Pulse Wire (48) to the 2 wires

that are on the back of the computer (15).

Attach the Computer to the Handlebar post ( 2) Using 4 – M5 x 10MM Screws (125) ( On back of Computer)

Note: Be careful not to damage or disconnect the wires when attaching the computer.

Step 6 - Install Seat

Attach Seat ( 14 ) to Seat post ( 03 ) using: 3 – M8 Flat Washer ( 88 )

3 – M8 Nyloc Nut ( 66 )

Step 7 –Install Pedals and Pedal Straps

Thread Right Pedal (8R) with an “R” onto the Right

Crank Arm ( 7 ) in a clockwise direction.

Thread Left Pedal (8L) with an “L” onto the Left

Crank Arm ( 7 ) in a counter–clockwise direction.

Step 8 – Plug the AC Adaptor

Plug the AC adaptor lead ( 95 ) into the socket at the rear end of your

Upright Bike as shown.

Plug the 6V 1000mA A.C. Adaptor into a suitable mains supply.

www.smoothfitness.co.uk

Image 10

Contents UB4 Upright Bike UB4 Ergometer Index Inhaltsverzeichnis Precautions Preassembly Open the boxesHardware Chart Complete Parts List Description QTYExploded Diagram UB4 Upright Bike Install the Handlebar Assembly InstructionsInstall Handlebar post Attach Front StabilizerInstall Pedals and Pedal Straps Install ComputerInstall Seat Plug the AC AdaptorLeveling Well DoneComputer Intstuctions Functions and FeaturesThings you should know before exercise Program Introduction & Operation Manual Program Manual Key functionOperations User Setting Program User 1, User 2, User 3, User Watt Control Program Watt Control Body Fat Program Body FatOperation guide Error MessageTechnical data of the current adapter LCD Workout GraphicsRandom Plateau Fartlek 75% H.R.C 55% H.R.C65% H.R.C 85% H.R.CBody FAT Stop Mode Body FAT Start Mode Warranty Sicherheitshinweise Vorbereitungen Öffnen Sie die KartonagenSchrauben SET Ersatzteilliste Explosionszeichnung Explosionszeichnung Schritt 2 Anbringen der hinteren Querstütze AufbauanleitungSchritt 1 Anbringen der vorderen Querstütze Schritt 3 Anbringen der LenkerstützeSchritt 7 -Anbringen der Pedale und Riemen Schritt 5 Anbringen des ComputersSchritt 6 Anbringen des Sattels Schritt 8 Einstecken des AdaptersJustierung GUT GemachtWas Sie vor Trainingsbeginn wissen sollten Computer AnleitungFunktionen und Eigenschaften Programmbeschreibung Manuelles Programm Manual TastenfunktionBedienung Benutzerprogramme Benutzer 1, 2, 3 Watt Programm Wattziel Köperfett Programm KörperfetttestFehlermeldungen ErläuterungTechnische Daten des Adapters Programm Zufall Hochebene Fahrtenspiel Individueller Zielpuls Programm Körperfett Stop Modus Körperfett Start Modus Garantieerklärung Website