Smooth Fitness UB4 Assembly Instructions, Attach Front Stabilizer, Attach Rear Stabilizer

9

UB4 Upright Bike

ASSEMBLY - INSTRUCTIONS

Step 1 - Attach Front Stabilizer

Attach Front Stabilizer (5) to Base Frame (1) and secure with:

2 – M8 Washers ( 84 )

2 – M8 Spring Washers ( 68 )

2 – M8 x 90MM Allen Head Bolt ( 71 )

Step 2 - Attach Rear Stabilizer

Attach Rear Stabilizer (6) to Base Frame (1) and secure with:

2 – M8 Washers ( 84 )

2 – M8 Spring Washers ( 68 )

2 – M8 x 90MM Allen Head Bolt ( 71 )

Step 3 - Install Handlebar post

Connect the Upper Computer Wire ( 47 ) to the

Lower Computer Wire ( 46 ) . Fit the Front Sleeve

(21)onto the Handlebar post ( 2 ) and put it down after tighten with screw.

Attach Handlebar post ( 2 ) to the Main Frame (1) using:

4 – M8 Washers ( 84 )

4 – M8 Spring Washers ( 68 )

4 – M8 x 15MM Round Allen Head Bolt ( 72 )

Note: Be careful not to damage or pinch wires when

Handlebar Post is installed.

Step 4 - Install the Handlebar

Attach the handlebar ( 4 ) to Handlebar post ( 2 ) using:

4 – M8 Washers ( 84 )

4 – M8 Spring Washers ( 68 )

4 – M8 x 15MM Round Allen Head Bolt ( 72 ). Attach Front handlebar cover (20) after screws are tightened.

www.smoothfitness.co.uk