JVC RX-730RBK manual Preparing for Dolby Surround, Wide Normal Phantom

Preparing for Dolby Surround

See also page 40.

MENU

English

SURROUND MODE

Front panel

SURROUND

ADJUST

Front panel

The receiver memorizes two sets of Dolby Surround adjustments; one for Pro Logic and the other for 3ch Logic.

On the front panel:

1.Press SURROUND MODE so that the Control % / Þbuttons work for selecting the surround modes.

The lamp next to the button lights up.

2.Press Control %/ Þ until “PROLOGIC” or “3CHLOGIC” whichever you want appears on the display.

The PRO LOGIC or 3CH LOGIC indicator (as well as the SURROUND indicator) also lights up. Each time you press the button, the surround modes change as follows (the indicator of the selected surround mode also lights up on the display):

PROLOGIC 3CHLOGIC HALL

		SURR OFF
		(Surround Off)
PROLOGIC	Select this mode to watch a video source with Dolby Surround when you have
	connected the rear speakers (and a center speaker).
3CHLOGIC	Select this mode to watch a video source with Dolby Surround when you have
	connected a center speaker and no rear speakers.
HALL	This is JVC’s original surround mode, and is different from Dolby Surround. To use
	this, see page 29.
SURR OFF	No surround mode is applied.

3.Press SURROUND ADJUST so that the Control % / Þ/ @/ # buttons work for adjusting the surround mode.

The lamp next to the button lights up.

4.Press Control %/ Þ until “CNT MODE” (Center Mode) appears on the display.

5.Press Control @/ # to select the center mode.

Each time you press the button, the center modes change as follows:

WIDE NORMALPHANTOM

OFF

WIDE	Select this mode when the center speaker can reproduce the bass better than the
	front speakers. All signals of the center channel are output through the center
	speaker.
NORMAL	Select this mode when the center speaker cannot reproduce the bass better than
	the front speakers. The bass portions of the center channel signals are output
	through the front speakers.
PHANTOM	Select this mode when you do not use a center speaker. The center speaker channel
	signals are output through the front speakers.
OFF	Select this mode to turn off the center speaker channel.

Notes:

•If you have already set the “center speaker size” following the procedure described on page 17, you do not have to select the center mode in this procedure.

•When you have selected “3CHLOGIC,” you cannot select “PHANTOM.”

Continued to the next page

Page 32