Assembly Instruction

Tools required to assembly the machine:

Two Adjustable Wrenches and Allen Wrenches.

STEP 1

∙ Connect the Front Bike Frame (#1) to the Front Leg Base (#2). Secure them with two M10 x 3 1/8” Carriage Bolts (#17), two Bent Washers (#19), and two M10 Aircraft Nuts (#18).

Step 2

∙ Connect the Rear Vertical Support (#8) to the Rear Leg Base (#3). Secure them with two M10 x 3 1/8” Carriage Bolts (#17), two Bent Washers (#19), and two M10 Aircraft Nuts (#18).

∙ Connect the Main Seat Frame (#4) to the Rear Vertical Support (#8). Attach a Bracket (#25) to each side of the Main Seat Frame (#4) and Rear Vertical Support (#8). Secure it in lower holes on the Bracket (#25) with two M8 x ½” Allen Bolts (#23) and ∅ 5/8” Washers (#24). Secure the Upper holes on the Bracket (#25) with a M6 x 2 ½” Allen Socket Bolt (#30) on one side, a M6 x ½” Allen Bolt (#26) on the other side, and two ∅ 5/8” Washers (#24). Secure the back of the Rear Vertical Support (#8) with two M8 x ½” Allen Bolts (#23) and ∅5/8” Washers (#24).