Important Safety Notice, Assembly Instructions

Owner’s Manual

IMPORTANT SAFETY NOTICE

Note the following precaution before assembling or operating the machine.

1.THE MAXIMUM WEIGHT CAPACITY OF THE ORBITREK ELITE IS 275 LBS (125 kgs). Persons whose body weight exceeds this limit should NOT use this machine.

2.Keep children and pets away from the Orbitrek Elite at all times. DO NOT leave unattended children in the same room with the machine.

3.Handicapped or disabled persons should not use the Orbitrek Elite without the presence of a qualified health professional of a qualified health professional or physician.

4.If the user experiences dizziness, nausea, chest pain, or any other abnormal symptoms, STOP the workout at once. CONSULT A PHYSICIAN IMMEDIATELY.

5.Before beginning training, remove all within a radius of 2 meters from the machine. DO NOT place any sharp objects around the Orbitrek Elite.

6.Position the Orbitrek Elite on a clear, level surface away from water and moisture. Place mat under the unit to help keep the machine stable and to protect flooring.

7.Use the Orbitrek Elite only for its intended use as described in this manual. DO NOT use any other accessories not recommended by the manufacturer.

8.Assemble the machine exactly as the descriptions in the instruction manual.

9.Check all bolts and other connections before using the machine for the first time and ensure that the trainer is in the safe condition.

10.Hold a routine inspection of the equipment.Pay special attention to components which are the most susceptible to wear off, i.e.connecting points and wheels. The defective components should be replaced immediately. The safety level of this equipment can only be maintained by doing so. Please don't use the Orbitrek Elite until it is repaired well.

11.NEVER operate the Orbitrek Elite if it is not functioning properly.

12.This machine can be used for only one person’s training at a time.

13.Do not use abrasive cleaning articles to clean the machine. Remove drops of sweat from the machine immediately after finishing training.

14.Always wear appropriate workout clothing when exercising. Running or aerobic shoes are also required.

15.Before exercising, always do stretching first.

16.The power of the machine increases with increasing the speed, and the reverse.

The machine is equipped with adjustable knob, which can adjust the resistance.

WARNING: BEFORE BEGINNING THIS OR ANY EXERCISE PROGRAM, CONSULT YOUR PHYSICIAN

F I R S T. THIS IS ESPECIALLY IMPORTANT FOR INDIVIDUALS OVER THE AGE OF 35 OR PERSONS WITH PRE-EXISTING HEALTH PROBLEMS. READ ALL INSTRUCTIONS BEFORE USING THE ORBITREK ELITE. THANE ASSUMES NO RESPONSIBILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE SUSTA I N E D BY OR THROUGH THE USE OF THIS PRODUCT.

SAVE THESE INSTRUCTIONS

Owner’s Manual

ASSEMBLY INSTRUCTIONS

BEFORE you begin:

1.Locate a comfortable work site. Assemble your OrbiTrek Elite in an open space with adequate ventilation and lighting. Because the OrbiTrek Elite is portable, to some extent, you need not assemble it exactly where it is to be used. For your convenience, however, you should avoid hauling the machine across excessive distances, through narrow passage ways or over staircases once its assembly is complete.

2.It’s a good idea to flatten out the shipping carton, and use it as a work surface when you assemble the OrbiTrek Elite. Keep a few paper towels handy since some of the components are lightly pre-greased.

Notice:

Find your tools. You will need the following tools to assemble the Orbitrek Elite. Ruler with both metric and English measurements

Allen wrench (6# and 8#) Spanner

Before assembling please check whether all needed parts are available (at the above of this instruction sheet you will you will find an exploded drawing with all single parts (marked with numbers) which this item consist of.

Identify your hardware:

Organize your bolts and nuts before assembly. Nuts are identified by the diameter of the cavities. For more information, refer to exploded view diagram and parts list on pages 8-10 of this manual.

NO.1 LEFT HINGE BOLT

NO.6 SPRING

NO.7 LEFT LOCK NUT (1/2”)

NO.9

CARRIAGE BOLT (M8*60)

WASHER (1/2”)

NO.11 ARC WASHER (Ø8)

NO.12 DOMED NUT (M8)

NO.13 NUT (M8)

NO.14 FLAT WASHER (Ø8)

NO.32 SPRING

NO.20 BOLT (M8*45)

NO.31 HINGE SCREW (3/8”*20)

NO. 33 D SHAPER WASHER

WASHER ( 10)

NO.93 ARC WASHER

NO.38 SPINDLE BAR

NO.89 RIGHT LOCK NUT (1/2”)

NO.34 LOCKING

(dl=16 D=26 s=0.3)

KNOB

NO.42 RIGHT HINGE BOLT

SPANNER

ALLEN WRENCH 6#

ALLEN WRENCH 8#

BK2080 specifications

The Elite BK2080 is a cutting-edge device that has quickly garnered attention for its impressive array of features and advanced technologies. Designed to meet the needs of both professionals and tech enthusiasts, the BK2080 strikes a perfect balance between high performance and user-friendly operation.

One of the standout features of the Elite BK2080 is its powerful processor. It is equipped with a state-of-the-art multi-core chipset, which ensures lightning-fast performance and seamless multitasking. This makes the device ideal for demanding applications such as graphic design, video editing, and high-end gaming. Coupled with this processor is the device's ample RAM, which allows for smooth and responsive navigation, even when multiple applications are running concurrently.

In terms of display technology, the Elite BK2080 boasts a vibrant, high-definition screen that provides exceptional clarity and color accuracy. This is particularly beneficial for users who require precise visuals, such as photographers and designers. The display also features anti-glare technology, minimizing reflections and making it easier to work in various lighting conditions.

Another notable characteristic of the Elite BK2080 is its storage capabilities. The device offers a combination of solid-state drive (SSD) and hard disk drive (HDD) options, allowing users to enjoy the speed of SSD for their operating system and frequently used applications, while benefiting from the extensive storage capacity of HDD for larger files and archives. This hybrid storage solution ensures that users have the best of both worlds.

Connectivity options on the Elite BK2080 are robust, featuring multiple USB ports, HDMI output, and advanced wireless technologies such as Bluetooth and Wi-Fi 6. This extensive connectivity allows for easy integration with other devices and peripherals, enhancing the overall user experience.

Battery life is another area where the Elite BK2080 excels. With an optimized power management system, users can expect extended use between charges, making it a reliable choice for on-the-go professionals. Additionally, the device’s lightweight and sleek design make it easy to transport, without sacrificing performance.

Overall, the Elite BK2080 stands out in the crowded technology market as a versatile, powerful, and reliable device. Its combination of advanced features, cutting-edge technology, and user-centric design makes it an excellent choice for anyone seeking a high-performance machine that can handle a variety of tasks with ease.