
SERVICE AND ADJUSTMENTS
TO REPLACE HEADLIGHT BULB
•Raise hood.
•Pull bulb holder out of the hole in the backside of the grill.
•Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.
•Close hood.
INTERLOCKS AND RELAYS
Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.
•Check wiring. See electrical wiring diagram in the Repair Parts section of this manual.
TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 32)
•Raise hood.
•Unsnap headlight wire connector.
•Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.
•To replace, reverse above procedures.
TO REPLACE | FUSE |
|
| |
Replace with 30 | amp | _ | HEADLIGHT | |
WIRE | ||||
fuse holder is located | behind the dash. |
| CONNECTOR |
FIG. 32
26