JVC RX-558RBK manual Attenuating the Input Signal, Reinforcing the Bass, Adjusting the Tone

Page 13

Attenuating the Input Signal

When the input level of the playing source is too high, the sounds will be distorted. If this happens, you need to attenuate the input signal level to prevent the sound distortion.

On the front panel ONLY:

INPUT ATT.

Press INPUT ATT. so that the lamp next to

Reinforcing the Bass

With this Bass Boost function, you can boost the bass level.

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

English

the button lights up.

•Each time you press the button, the Input Attenuator mode turns on or off.

Note:

When selecting “DVDMULTI” as the source, this effect only applies to front left and right channel signals.

Adjusting the Front Speaker Output

Balance

If the sounds you hear from the front right and left speakers are unequal, you can adjust the speaker output balance.

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

On the front panel ONLY:

1. Press ADJUST so that the cursor control %/ Þbuttons work for adjusting the sound.

2. Press cursor control %/ Þ repeatedly until “B–BOOST” appears on the display.

3. Press cursor control @/ #to switch this function “ON” or “OFF.”

• When this function is switched “ON,” the BASS BOOST lamp on the front panel lights up.

Note:

ADJUST

On the front panel ONLY:

1. Press ADJUST so that the cursor

ADJUST

 

control % / Þbuttons work for

 

adjusting the sound.

 

2. Press cursor control % / Þ repeatedly until “BALANCE” appears on the display.

The Bass Boost function affects the front speaker sounds only.

Adjusting the Tone

You can adjust the treble and bass sounds as you like.

Before you start, remember...

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

3. Press cursor control @/ # to adjust the balance.

•Pressing @ decreases the right channel output.

•Pressing # decreases the left channel

output.

On the front panel ONLY:

1. Press ADJUST so that the cursor control %/ Þbuttons work for adjusting the sound.

2.Press cursor control %/ Þ repeatedly until “– BASS +” or

“–TREBLE+” appears on the display.

ADJUST

•Select “– BASS +” to adjust the bass sound level.

•Select “–TREBLE+” to adjust the treble sound level.

3.Press cursor control @/ #to adjust the bass or treble sound

level within the range of –10 to +10.

•Each time you press the button, the sound level changes by ±2 steps.

10

Page 12 Page 14
Image 13
Page 12 Page 14
Contents RX-558RBK Per I’ltalia Español Italiano Table of Contents Parts Identification Remote ControlFront Panel To use the Cursor control buttons w on the front panelConnecting the FM and AM MW/LW Antennas Before InstallationChecking the Supplied Accessories Getting StartedBasic connecting procedure Connecting the SpeakersConnecting the front speakers AM MW/LW Antenna ConnectionsConnecting the rear and center speakers Connecting Other ComponentsConnecting the subwoofer speaker Audio component connectionsIf your audio components have a Compu LINK-3 terminal Video component connectionsPutting Batteries in the Remote Control Connecting the Power CordPlug the power cord into an AC outlet Replace the coverFrom the remote control Turning the Power On and Off StandbyBasic Operations On the front panelMuting the Sound Adjusting the VolumeSelecting the Front Speakers Recording a SourceAdjusting the Front Speaker Output Balance Attenuating the Input SignalAdjusting the Tone Reinforcing the BassSetting Center and Rear Speakers for DSP Modes Basic SettingsChanging the Source Name Adjust the sound using the functions listed to the left Storing the Basic Settings Adjustments One Touch OperationUsing the Sleep Timer Press ONE Touch OperationUsing Preset Tuning Tuning in Stations ManuallyReceiving Radio Broadcasts Using the RDS Radio Data System to Receive FM Stations Selecting the FM Reception ModePress FM Appears on the displaySearching for a Program by PTY Codes To search for a program using the PTY codesPress PTY Search while Listening to an FM stationPress EON so that the last selected Switching to a Broadcast Program Your Choice TemporarilyProgram type appears on Display Press TA/NEWS/INFO until3D-PHONIC modes Using the DSP ModesSurround Modes Dolby SurroundFront Available DSP Modes According to the Speaker ArrangementRear Speaker RearAdjusting the DAP Modes Adjusting the 3D-PHONIC ModesPress Test to check the speaker Press Rearl / + to adjustOutput balance Rear speaker output levelTo cancel the DSP mode Until the DSP mode you want Appears on the displayPress Surround repeatedly Activating the DSP ModesActivating the DVD Multi Playback Mode Using the DVD Multi Playback ModeRemote Control through the Remote Sensor on the Receiver Compu Link Remote Control SystemSame time Synchronized RecordingSound control section Amplifier Operating Other ComponentsCD player TunerMD recorder Cassette deckDVD player TV CH -/+Problem Possible Cause Solution TroubleshootingAmplifier SpecificationsAM MW/LW tuner FM tuner IHFGeneral EN, GE, FR, NL, SP, IT 0299HIMMDWJEM
Related manuals
Manual 32 pages 5.36 Kb

RX-558RBK specifications

The JVC RX-558RBK is a versatile and feature-rich audio receiver that caters to home theater enthusiasts and casual listeners alike. This receiver is designed to deliver impressive audio performance while providing a wide range of connectivity options and user-friendly features.

One of the standout characteristics of the JVC RX-558RBK is its power output, which can produce up to 100 watts per channel. This ample power ensures that your audio experiences, whether from movies, music, or gaming, are immersive and filled with vibrant sound. The receiver is equipped with a robust amplifier that offers clear and dynamic audio reproduction across various frequencies.

The RX-558RBK features multiple audio decoding technologies, including Dolby Digital and DTS, which allow for an enhanced surround sound experience. This makes it an excellent choice for creating a stunning home theater setup. The receiver supports various audio formats, providing flexibility for users who enjoy diverse content.

Connectivity options are abundant with the RX-558RBK. It comes with multiple HDMI inputs, allowing users to connect their Blu-ray players, gaming consoles, and streaming devices seamlessly. The HDMI ARC (Audio Return Channel) capability simplifies connectivity by allowing audio signals to be sent back to the receiver from a TV, eliminating the need for additional cables.

Another notable feature of the JVC RX-558RBK is its built-in FM/AM tuner, which enables users to enjoy their favorite radio stations with ease. The receiver includes digital presets for convenient access to preferred channels. Additionally, for those who prefer modern streaming options, the RX-558RBK is compatible with Bluetooth technology, allowing for wireless audio streaming from smartphones, tablets, and other devices.

User convenience is prioritized with the RX-558RBK, featuring an intuitive interface and a well-designed remote control. The on-screen display makes setup and navigation straightforward, minimizing the learning curve for new users.

In terms of build quality, the JVC RX-558RBK boasts a sleek design with a clean aesthetic that complements any home decor. It also incorporates protective circuit designs to ensure longevity and reliability.

In summary, the JVC RX-558RBK is a powerful, feature-packed audio receiver that combines advanced technologies, robust performance, and ease of use. Whether you are looking to enhance your movie watching or elevate your music listening experience, the RX-558RBK stands out as a solid option in the audio receiver market.
Top Page Image Contents