Refresh-charging:
| LIGHT ON CHARGER |
| HOW LONG DOES IT TAKE ? | WHAT’S HAPPENING ? | |
|
|
|
|
| |
1. | RED light blinks |
| Just a few moments | Charging will start soon | |
0.9 sec “on” / 0.1 sec “off” | (“waiting”) | ||||
|
| ||||
2. |
| Push “REFRESH” button on the charger | |||
3. | GREEN light burns |
| 10 hours max. | Discharging / refreshing | |
4. | RED light burns |
| 4~5 hours max. | Charging | |
5. | RED light blinks slowly |
| Until the power source plug is | Charging completed ! | |
2 sec “on” / 2 sec “off” |
| disconnected | (“completion”) | ||
|
| ||||
Step 10. Disconnect the power source plug from the electric point.
Step 11. Disconnect the charger plug from the battery.
Step 12. Mount the battery onto the bicycle (step 2 and 1 in reversed order). Make sure that the battery is secured in “LOCK” position, so that it cannot move sideways.
5.1.4 Energy indicator
The amount of energy available is indicated via a Light Emitting Diode (LED) string, located on the battery. (see fig. 18 and 29). The indicator will illuminate when you push the “PUSH” button. When fully charged, all five LEDs will be illuminated. As energy is used, less LEDs are illuminated. The light of the LEDs will go out after a few seconds.
Pag. 17.