Giant Model Year 2002 owner manual

Page 23

rotating reduces clamping force. Less than half a turn of the tension adjusting nut can make the difference between safe clamping force and unsafe clamping force.

NOTE:

Once the quick-release is installed in the hub axle by the manufacturer or the dealer, it never needs to be removed unless the hub itself requires servicing. If the hub requires servicing, consult your dealer.

6.3.3 Front wheel secondary retention devices

Lafree Twist is equipped with a secondary wheel retention device (see fig.

32)to keep the wheel from disengaging if the quick-release is incorrectly adjusted or the cam opens accidentally. Secondary retention devices are not a substitute for correct quick-release adjustment.

The secondary retention device is integral with the fork dropouts and is recessed for the quick-release lever that keeps the wheel from dropping out of the fork’s dropouts should the quick-release lever open accidentally.

However, these tabs are not designed to keep the wheel in place should the quick-release lever open accidentally. If you hear or feel looseness coming from the front wheel, stop riding immediately and check the quick- release tension. Ask your dealer to explain Lafree’s secondary retention device in more detail.

Secondary retention device

WARNING:

Removing or disabling the secondary retention device is extremely dangerous and may lead to serious injury or death. It also may void the warranty.

6.3.4 Removing a quick-release front wheel

(a)Release the front brake’s elbow cable guide and spread the brake shoes to allow the front tyre to move in between them (see fig. 33).

(b)Rotate the wheel’s quick-release lever from the locked or “CLOSE” position (you can read “CLOSE” on the lever) to the “OPEN” position (you can read “OPEN” on the lever) (see figs. 34 and 35).

(c)Loosen the tension adjusting nut about six full turns.

(d)Raise the front wheel a few centimetres / inches off the ground and tap the top of the wheel with the palm of your hand to knock the wheel out of the front fork.

Pag. 23.

Image 23
Contents June Lafree Twist Model YearContents Approval and conformity Read this manualTrademarks General What it’s calledHandlebar and stem Battery and chargerPosition of the serial numbers Fit Fit and safetySaddle position Handlebar height and angle Safety equipmentMechanical safety checks Page Wet weather riding Riding safely and responsiblyBasics Rules of the roadBattery detachment, charging & installation Battery and charger operationDo not Push the Refresh Button on Charger Page Push the Refresh Button on Charger Refresh-charging Page Storage & transportation Care & maintenanceShort summary of recommendations for a high range Page How things work General Power control switchFront wheel quick release Page Brakes Tyres and inner tubes Gear changingKick stand Lighting systemLock Luggage carrier Service & maintenanceTransportation of Lafree Twist Service & maintenance schedule See fig Tightening torque If you get a flat tyre Precautions and proceduresEmergency equipment and knowledge If you crash Comfort & performance accessoriesIf you break a spoke About your dealer Dealer serviceGuarantee regulations of Lafree Europe