Assembly
5 | 8 |
Pedal Axle |
|
Metal Tab
Slot
Pedal Hub
Pedal Hub
Pedal Axle
Pedal Hub
•Fit two pedal hubs onto the pedal axle metal tabs. Make sure the metal tabs fit into the slot in each pedal hub.
•Turn the front wheel assembly over.
•Insert a pedal hub onto the top of the pedal axle and into the hole in the center of the front wheel.
•Insert the remaining pedal hub below the pedal axle and into the hole in the center of the front wheel.
6 | Pedal Hubs | 9 | Pedal Hubs |
| |||
| Pedal Axle |
|
|
Front Wheel
Hole
•While holding the pedal hubs on the pedal axle, insert the pedal axle into the hole in the center of the front wheel.
•Push the pedal hubs into the center of the front wheel until they are flush with the surface of the front wheel.
10
7
Pedal Hubs |
| Pedal |
|
| |
|
| Pedal Axle |
|
| Front Wheel |
|
| Assembly |
• Push the pedal hubs into the center of the front wheel |
|
|
until they are flush with the surface of the front wheel. |
| Scrap Block |
|
| of Wood |
| • | Place a scrap block of wood under the front |
|
| wheel assembly. |
| • | Fit a pedal on the pedal axle. |
| • | Tap the pedal with a hammer until it is secure. |
| • | Repeat this procedure to attach the other pedal to the |
| other end of the pedal axle. | |
|
| |
East Aurora, New York 14052, U.S.A. |
|
|
© 2001 Mattel, Inc. All Rights Reserved. |
|
|
® and ™ designate U.S. trademarks of Mattel, Inc. | 4 | Printed in Mexico |
BARBIE is a U. S. trademark of Mattel, Inc. |