9. Support pole and tank assembly over support table. Carefully slide backboard components onto pole.
WARNING!
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!
DO NOT LEAVE ASSEMBLY UNATTENDED WHEN EMPTY; IT MAY TIP OVER.
SAWHORSE OR SUPPORT TABLE
10.While still in the horizontal position, carefully slide backboard components onto pole. Secure hardware at desired position as shown and tighten all hardware completely at this time.
17
12
23
NOTE:
Peel protective
film from surface
of acrylic
backboard prior
to use.
P/N 21273401 07/28/04 | 14 |
http://www.huffysports.com