Huffy Fitness Equipment specification

13. Roll the completed assembly to the desired playing area. Insert the T-strap (14) through the slot on the back of the base as shown. Secure the unit to ground by twisting the tie down stake (23) into the ground and hooking the T-strap (14) onto the tie down stake (23). Fill tank with 33 gallons of water.

WARNING!

TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.

WARNING!

DO NOT LEAVE ASSEMBLY UNATTENDED WHEN EMPTY; IT MAY TIP OVER.

SAND		lb	.	)
				kg)
(360

	(163

NOTE:

IF USING SAND: 2 GALLONS OF ANTI-FREEZE IS NOT REQUIRED

14. Lock elevator system into highest position (the backboard is as high as it will go). Apply 10 ft. height indication sticker (45) to inner adjustment tube (47) directly below arrow on handle as shown.

Move elevator system to the next position and apply the 9 1/2 ft. sticker. Repeat until all height settings have been labeled. (7.5-10 ft.)

15. Apply the height adjustment and moving label (25) to the front of the pole as shown.

	WARNING!	25
	DO NOT ALLOW	25
	CHILDREN TO	10 ft.
	CHILDREN TO	(3.05 m)
	ADJUST HEIGHT.	(3.05 m)

P/N 211017

2/05