Huffy Fitness Equipment manual

Page 12

Secure flat end of tank struts (10) to pole using bolt (11), washers (12), and nut (13), as shown. Rotate

6. the non-secured angled ends of the struts (10) as shown.

12

11

6

12

13

10

6

10

1

10

7.

1

Secure tank struts (10) to the base using bolt (15), washers (12), and nut (16).

10

15

12

12

16

8. Install pole mount bracket (27) and reinforcement bracket (34) with carriage bolts (28) in lower pole mounting holes as shown.

Tighten flange nuts (16) completely.

5

27

16

34

28

P/N 211017

2/05

12

Image 12
Contents Portable System Before YOU Start Safety Instructions Warranty Card Get to know the basic parts of your basketball system Parts List See Hardware Identifier Hardware Identifier Bolts & Pins Item #33 Item #7 Section a Assemble the Base While maintaining alignment, bounce pole top 4 Do not Over Page Section B Attach the Backboard Page Page Handle Do not Leave Assembly Unattended When Empty IT MAY TIP Over Install Slam Jam Rim to Backboard Clip ARM Clip Body NET Installation USE EYE Protection If Using Sand 2 Gallons of ANTI-FREEZE is not Required