Insert caps (8) into end of each support arm (9 &
8. 10) as shown. Tap firmly in position.
9. Apply logo label (11) to lower support arms (10) as shown. Repeat for opposite side.
Beginning with upper support arms (9) secure
10. support arms to pole. Continue by securing lower support arms (10) as shown.
12
WARNING
THREE PERSON MINIMUM REQUIRED FOR THIS PROCEDURE. NOT FOLLOWING RECOMMENDATION MAY RESULT IN SERIOUS BODILY INJURY AND/OR PROPERTY DAMAGE.
14
14
IMPORTANT!
Do not over tighten.
IMPORTANT!
MAKE SURE TOP
SET OF ELEVATOR ARMS ARE RESTING ON THIS MAUAL STOP BEFORE ATTACHING
SHORT END
14
14
7
9 |
| 8 |
|
|
|
9
12
8
11
10
8
14
14
14
7
8
8
10 | 14 |
|
5
P/N 211446D 12/02 | 6 |