Huffy AWLC3026T manual Should have a

IMPORTANT! Center alignment slot of
middle pole section (5) in a lower hole
4. of top pole section (4) as shown. While	5
maintaining alignment, bounce middle pole

(5)into top pole section (4) as shown until top pole section no longer moves toward

taped reference mark on middle pole. Upright assembly.

NOTE:
POLE SECTIONS
SHOULD HAVE A
3-1/2" (9 CM)	4
MINIMUM OVERLAP.

WOOD SCRAP

(NOT SUPPLIED)

5. IMPORTANT! Center alignment slot of lower pole section (6) in a lower hole of middle pole section (5) as in step 3. While maintaining alignment, bounce top & middle pole assembly (4 & 5) onto lower pole section (6) as shown until top & middle pole assembly no longer moves toward taped reference mark on bottom pole.

4

5

NOTE:

POLE SECTIONS

SHOULD HAVE A

3-1/2" (9 CM)

MINIMUM OVERLAP.

6

WOOD SCRAP

(NOT SUPPLIED)

P/N 21495407 08/05 10