6. | Install rod (7) through holes in bottom pole | 7 |
| ||
| section (6) and eyebolt (8). |
4
5
6
8
7. Insert pole assembly into tank assembly as shown.
6
WARNING! |
|
TWO PEOPLE REQUIRED | 7 |
FOR THIS PROCEDURE. |
|
FAILURE TO FOLLOW THIS |
|
WARNING COULD RESULT | 8 |
IN SERIOUS INJURY AND/OR | |
PROPERTY DAMAGE. |
|
IMPORTANT!: |
DO NOT OVER |
TIGHTEN |
8. Carefully place unit on its side. Secure pole bottom (6) to tank with anchor strap (52), washers (9 & 13) and nut (10) as shown. Upright unit.
NOTE:
Keep unnecessary pressure off of the pole assembly when in this position. Two people recommended for this procedure.
IMPORTANT!: |
DO NOT OVER |
TIGHTEN |
6
1 
9
13
10
52
11 | 08/05 | P/N 21495407 |