7. Pole bracket (20) will need to be lightly pressed into backboard ribbing. Be sure to press completely into place. Attach rim (18) to backboard (22) and pole bracket (20) with knob (17), reinforcement bracket (11), and carriage bolt (16) as shown. Tighten knob completely.
SAWHORSE OR SUPPORT TABLE
22
PRESS BRACKET (20)
INTO PLACE HERE 
16
20
Carefully tip unit forward and slide backboard assembly onto pole as shown.
WARNING!
KNOB MUST BE TIGHTENED
COMPLETELY AND
CHECKED FOR TIGHTNESS
BEFORE EACH USE.
11 | 17 |
18
SAWHORSE OR SUPPORT TABLE
ID# M611701 12/05 | 12 |