Huffy RC3200, RC9200, RC2000MK2, RC5200 manual Bottom View

IMPORTANT! WRITE DOWN MODEL NUMBER FROM BOX ON PAGE 1 OF THIS OWNERS MANUAL

1.

2.

Remove all parts from packing material and separate tanks from the shipping position.

Carefully, position front tank (1) upside down. Secure wheel (2) into place from bottom side (illust. A)

making sure the wheel bracket (5) seeds into base as in illust. B. Repeat procedure for opposite wheel. Finger tighten, then upright assembly.

A	1	B	5	3
	2	3
	SIDE VIEW	4
6	5			6
	BOTTOM VIEW			4
				BOTTOM VIEW
3.	Correctly identify each pole section	TOP		7
	and mark tape as shown.

8MIDDLE

5” (13 cm)

4. IMPORTANT! Bounce
	8
pole top (7) and middle
section (8) together as
shown until they no longer
move toward taped
reference mark. Upright
assembly.

NOTE: Pole sections should have a 3-3/4" (9.5 cm) minimum

overlap.7

	BOTTOM
5” (13 cm)	35-1/2”
	(90.2 cm)

5. IMPORTANT! Holes in top (7) and bottom pole (9) sections MUST ALIGN to correctly position elevator system toward playing surface. Add bottom pole section (9) to assembly as shown and bounce until completely tight.

NOTE: Pole sections should have a 3-3/4" (9.5 cm) minimum overlap.

9

LARGE

HOLE

7

8

9

Wood Scrap

LARGE

HOLE

3 04/03 P/N 211657B