21. Secure board and elevator tube assembly to pole assembly as shown. Finger tighten.
IMPORTANT!
WARNING
25
4
40
DO NOT OVER
TIGHTEN.
TWO PERSON MINIMUM
REQUIRED FOR THIS
PROCEDURE. NOT
FOLLOWING
RECOMMENDATION
MAY RESULT IN
SERIOUS BODILY
INJURY AND/OR
PROPERTY DAMAGE.
38
38
4
6
4
6
4140
4
SCREW JACK
ASSEMBLY
SAWHORSE OR SUPPORT TABLE
Insert spacer (41) through top holes of height indicator cover
22. (31) and screw jack assembly as shown. Align spacer and screw jack assembly between elevator tubes (34) and secure.
NOTE:
NOW COMPLETELY TIGHTEN ALL
BOLTS FROM STEPS
IMPORTANT!
WHEN SECURING SCREW JACK (20) TO
TOP ELEVATOR TUBES (34), USE SPACER (41) BETWEEN ELEVATOR TUBES AS SHOWN.
P/N 211657B 04/03
12