Muratec F-114 Series manual Clearing LCD Error Messages, Display Meaning Suggested solutions

Clearing LCD Error Messages

Messages appears on the display to indicate the control panel to indicate the machine’s status or errors. Refer to the following table to understand the message’s meaning and correct the problem, if necessary. Messages and their meanings are listed in alphabetical order.

Display	Meaning	Suggested solutions
	Your machine’s memory has	To cancel the fax job, press the
	become full while	No 1 button “Yes.”
Cancel ?	documents were being	If you want to send the pages
	loaded into memory.	already stored, press the No 2
1:Yes 2:No
		button “No.” You should send
		the remaining pages later when
		the memory is available.
[Comm. Error]	The machine has a	Ask the sender to try again.
	communication problem.
	The machine has a problem	Please contact a service
CRU Fuse Error	with recognizing the new	representative.
	toner cartridge.
	The loaded document has	Clear the document jam. See
[Document Jam]	jammed in the ADF	page 9.2.
	(Automatic Document
	Feeder).
[Door Open]	The front or rear cover is not	Close the cover until it locks into
	securely latched.	place.
	You have tried to select a	Just use a one-touch or speed
	group location number	dial number or dial a number
Group Not Available	where only a single location	manually using the number
	number can be used, such	keypad.
	as when adding locations for
	a broadcasting operation.

9.8TROUBLESHOOTING