Muratec F-114 Series Remote machine does, Fuser unit It back in. If the problem Open Heat Error

Display	Meaning	Suggested solutions
	The remote machine does	Reconfirm the remote machine’s
	not have the requested	features.
	feature, such as a delayed
	transmission.
[Incompatible]	It also occurs if the remote
	machine does not have
	enough memory space to
	complete the operation you
	are attempting.
[Jam 1] or	The toner cartridge is not	Install the toner cartridge. See
[No Cartridge]	installed.	page 1.10.
	The remote person did not	Try again after a few minutes.
Line Busy	answer or the line is already
	engaged.
	Your machine cannot	Try again. If the problem
	connect with the remote	persists, wait an hour or so for
[Line Error]	machine or has lost contact	the line to clear and try again.
	because of a problem with
		Or, turn the ECM on. See
	the phone line.
		page 6.35.
	You have attempted to set	Load a document and try again.
Load Document	up a copy or fax operation
	with no document loaded.
Low Heat Error	There is a problem in the	Unplug the power cord and plug
	fuser unit.	it back in. If the problem
Open Heat Error
		persists, please contact a service
[Over Heat]
		representative.
	The memory is full.	Delete unnecessary documents,
		retransmit after more memory
Memory Full		becomes available or split the
		transmission into more than one
		operation.
	The remote fax machine has	Try again. Make sure that the
[No Answer]	not answered after several	remote machine is operational.
	redial attempts.		9
	The one-touch or speed dial	Dial the number manually using
	location you tried to use has	the number keypad or assign the
NO. Not Assigned	no number assigned to it.	number. For storing a number,
		see “Automatic Dialing” on
		page 6.15.

TROUBLESHOOTING 9.9